We take a look at the BQ41Z50 Evaluation Module from Texas Instruments. It’s a single-chip two to four cell battery pack manager with Dynamic Z-track technology to provide high-accuracy cell stats and battery safety functions.

Texas Instruments' MSPM0L111x are ultra-low power 32 MHz ARM Cortex-M0+ microcontrollers with 64 or 128 KB dual-bank flash, flexible firewalls for code protection, and rich mixed-signal peripherals.

At embedded world 2026, in the DigiKey booth, Lucy Barnard speaks with Vinay Agarwal, Vice President and General Manager of MSP Microcontrollers at Texas Instruments about TI's approach to making Edge AI accessible across their entire MCU portfolio.

This video discusses the BQ41Z50 Battery Fuel Gauge with predictive Dynamic Z-Track™technology from Texas Instruments.

We take a look at the MSPM0L1306 LaunchPad™ development kit from Texas Instruments.

With Texas Instruments’ SimpleLink Wi-Fi CC33xx Family with 2.4 GHz and 5 GHz Wi-Fi 6 support, plus optional Bluetooth LE, in a low cost co-processor you can add to any microcontroller project you have to instantly IoT-ify it.

At electronica 2024, in the DigiKey booth, Paige West speaks with Henrik Mannesson, General Manager, Grid Infrastructure, Industrial Systems, Texas Instruments about energy infrastructure applications featuring real-time MCUs.

This video discusses the ADS981x 8-Channel Dual Simultaneous-Sampling ADC family from Texas Instruments. They are 18-bit, 8-channel data acquisition systems based on a dual, simultaneous-sampling successive approximation register ADC.

At embedded world 2024, on the DigiKey booth, Kristian McCann speaks with Mike Pienovi, Product Line Manager, High Performance Processors at Texas Instruments about building smarter, safer robotics and automotive applications.

Texas Instruments’ THVD1454 is a half-duplex RS-485 transceiver available in a 10-VSON (DRC) package. This board features a selectable data rate and switchable integrated termination resistors.

At Embedded World 2023 in the DigiKey booth, Paige West speaks Brian Berner, Platform Marketing – Embedded Processors at Texas Instruments about their new devices for vision processing.

The Texas Instruments SK-TDA4VM processor starter kit brings smart cameras, robots and intelligent machines to life.

The Texas Instruments MCF8316 A is a single-chip, code-free, sensorless, Field Oriented Control solution for customers driving speed-controlled 12 to 24 volt brushless DC motors or Permanent Magnet Synchronous motors with up to 8 amps peak current.

At electronica 2022 in the DigiKey booth, Paige West speaks with Brian Berner, Platform Marketing - Embedded Processors at Texas Instruments about enabling smarter, safer, and more scalable robots of tomorrow.

The Texas Instruments AWR1843AOPEVM antenna-on-package evaluation module is an easy-to-use platform for evaluating the AWR1843AOP millimeter-wave radar sensor.

This power density video is focused on thermal enhancements possible at the system level, as well as some of the innovations at a package level that TI is developing for its products.

Texas Instruments’ REF70 family of high-precision voltage references fulfills the growing need for ultra-precise voltage regulation with low noise and low temperature drift.

Texas Instruments interview at Embedded World 2022.

Texas Instruments’ OPA397 Single Low offset, Low Noise RRIO e-trim™ Op-Amp is cost-optimized and suitable for upstream analog signal chain and downstream signal chain applications.

The LMR36503 - Q1 from Texas Instruments is an ultra-small, 65 Volt, 0.3 amp, synchronous, step-down DC-to-DC converter in a 2 mm by 2 mm HotRod™ package.