Configuración
Entrega rápida
Tipos de pago
Producto del mercado
Murata industrial automation applications and components
Powering smarter, more connected, and more reliable factories
Modern factories depend on precise sensing, reliable connectivity, efficient power conversion, and clean signal integrity. As industrial automation systems become faster, smarter, and more autonomous, designers must also manage electromagnetic interference, heat, vibration, mechanical stress, and limited board space.
Murata supports the industrial automation signal chain from the AC input to the sensor edge. Explore Murata solutions for wireless connectivity, high-performance MEMS sensing, AC/DC and DC/DC power conversion, timing, EMI suppression, circuit protection, capacitors, inductors, and temperature monitoring across controllers, drives, robotics, mobile automation, and condition-monitoring systems.
Explore by application
- Industrial controllers,
HMIs, and edge gateways - AC servo systems
and motor drives - Humanoid robots
and robotic arms - AGVs and autonomous
mobile robots - Condition monitoring
and smart sensor nodes
Industrial controllers, HMIs, and edge gateways
Industrial controllers, HMIs, remote I/O systems, and edge gateways require reliable power conversion from the AC input through to isolated low-voltage board rails. They must also maintain robust communications, accurate timing, and clean signal paths in electrically noisy factory environments.
Murata provides AC/DC, PoE, and board-level DC/DC power solutions together with wireless connectivity, timing devices, common-mode filtering, and interface protection for compact, reliable industrial-control designs.
Advantages
Complete power architecture from the AC input and PoE interface to isolated board-level rails
Reliable industrial communication, control, and edge-processing interfaces
Compact timing, EMI suppression, and ESD protection for dense controller boards
Product categories
Featured solutions
PQC600 series open-frame AC/DC power supplies
Compact, high-efficiency 600 W AC/DC power for industrial control cabinets, HMIs, robot controllers, industrial computers, and machine-vision systems.
MYBSP series PoE+ PD DC/DC converters
Provide isolated, regulated power for Ethernet-powered remote I/O, industrial gateways, cameras, sensors, and distributed control nodes.
NCM3 series isolated 3 W DC/DC converters
Deliver wide-input, high-isolation board power for industrial analog I/O, communications, measurement, and distributed control circuits.
NXJ1T series isolated 1 W SMT DC/DC converters
Provide compact isolated power for communication interfaces and analog front-end measurement circuits in automation equipment.
Type 2NR – LBMA0ZZ2NR bluetooth LE / IEEE 802.15.4 module
Add low-power multi-radio connectivity for equipment commissioning, wireless sensors, local service access, and industrial edge devices.
Type 2JM – LBWA0ZZ2JM ultra-low-power Wi Fi module
Connect battery-operated and retrofit monitoring nodes to factory Wi Fi networks while providing embedded processing for local sensor functions.
DLW / DLM series common-mode chokes
Suppress common-mode noise on Industrial Ethernet, fieldbus, and other differential communication lines.
LXES**T series silicon ESD protection devices
Protect Ethernet, USB, and other high-speed controller interfaces against electrostatic discharge.
XRC series crystal units
Provide stable timing for microcontrollers, processors, FPGAs, memory, and network interfaces.
AC servo systems and motor drives
AC servo amplifiers and industrial motor drives combine fast-switching power stages, isolated measurement circuits, gate drivers, encoders, communications, and precision control electronics.
Murata solutions provide isolated power for gate drivers and interface circuits, wideband EMI filtering, compact power inductors, temperature monitoring, and mechanically robust capacitors for reliable operation in electrically and mechanically demanding environments.
Advantages
Isolated power for gate drivers, communications, and analog measurement circuits
Broadband EMI suppression across power, encoder, and control interfaces
Reliable temperature monitoring and vibration-tolerant decoupling
Product categories
Featured solutions
NXJ1T series isolated 1 W SMT DC/DC converters
Provide isolated bias power for communication interfaces and analog measurement circuits in drives, servo amplifiers, and motor-control equipment.
MGJ2 series 2 W isolated gate-drive DC/DC converters
Generate compact bipolar isolated supplies optimized for IGBT and MOSFET gate-driver circuits.
MGJ6 series 6 W isolated gate-drive DC/DC converters
Power IGBT, MOSFET, and SiC bridge gate-driver circuits with configurable bipolar outputs.
DLW / DLM series common-mode chokes
Suppress common-mode noise on Industrial Ethernet, fieldbus, and other differential communication lines.
LQH / DFE series power inductors
Support compact auxiliary and point-of-load power conversion within servo amplifiers and motor drives.
NCP / NCU thermistors
Support temperature monitoring, overheat detection, and inrush or current protection around motors and power stages.
PRF series thermistors
Support temperature monitoring, overheat detection, and inrush or current protection around motors and power stages.
GRJ series soft-termination multilayer ceramic capacitors
Improve decoupling reliability on circuit boards exposed to vibration, board flex, and thermal cycling.
Humanoid robots and robotics arms
Humanoid robots and robotics armsrequire accurate motion and orientation feedback, compact joint electronics, reliable power conversion, and robust communication while operating under continuous movement, vibration, and changing mechanical loads.
Murata’s industrial MEMS sensors support precision motion, tilt, and stabilization. Murata connectivity, power, EMI suppression, capacitors, and temperature-sensing products support robot controllers, manipulators, servo joints, end-of-arm systems, and local service interfaces.
Advantages
High-performance six-degree-of-freedom motion and orientation sensing
Compact wireless connectivity for commissioning, diagnostics, and local sensors
Vibration-tolerant power, filtering, and temperature-monitoring solutions
Product categories
Featured solutions
SCH16T series industrial 6DoF MEMS IMU
Deliver high-performance three-axis angular-rate and three-axis acceleration sensing for precision robot control, orientation, stabilization, and dynamic inclination measurement.
SCA3400-D01 three-axis accelerometer
Provide high-stability acceleration and tilt data for robot-base leveling, platform movement, precision machine control, and structural monitoring.
Type 2JM – LBWA0ZZ2JM ultra-low-power Wi Fi module
Connect battery-operated and retrofit monitoring nodes to factory Wi Fi networks while providing embedded processing for local sensor functions.
Type 2NR – LBMA0ZZ2NR bluetooth LE / IEEE 802.15.4 module
Enable wireless commissioning, end-of-arm sensor connectivity, local diagnostics, equipment identification, and service-tool communication.
PQC600 series open-frame AC/DC power supplies
Deliver compact 600 W power for robot controllers, industrial computing, machine-vision equipment, and supporting electronics.
MGJ2 series isolated gate-drive DC/DC converters
Supply compact bipolar isolated power for servo-joint and bridge gate-driver circuits.
UQQ series DC/DC converters
A long but limited description that gives the user context about what product, service, or area they are clicking into, but not too much information as to overload them, but not too much information as to overload them..
UEE series DC-DC converters
A long but limited description that gives the user context about what product, service, or area they are clicking into, but not too much information as to overload them.
GRJ series soft-termination multilayer ceramic capacitors
Support reliable coupling, decoupling, and filtering in continuously moving robotic assemblies.
BLM series chip ferrite beads
Suppress high-frequency noise on sensor, encoder, controller, and communication rails.
NCP / NCU series NTC thermistors
Monitor joint motors, power stages, controller boards, and enclosed robotic electronics.
AGVs and autonomous mobile robots
Automated guided vehicles and autonomous mobile robots require accurate motion and orientation sensing, dependable wireless communication, indoor positioning, efficient onboard power conversion, and material traceability.
Murata sensing, Wi‑Fi, UWB, power-conversion, inductor, and RFID technologies support navigation, vehicle control, telemetry, diagnostics, localization, onboard computing, and intralogistics workflows.
Advantages
High-stability motion and tilt sensing for navigation and vehicle control
Wi‑Fi and UWB connectivity for telemetry, ranging, positioning, and diagnostics
Compact onboard power and traceability solutions
Product categories
Featured solutions
SCH16T series industrial 6DoF MEMS IMU
Support inertial navigation, orientation tracking, dynamic inclination measurement, and precision mobile-platform control.
SCA3400-D01 three-axis accelerometer
Provide high-stability tilt, leveling, platform-motion, positioning, and guidance data for mobile industrial equipment.
Type 2JM – LBWA0ZZ2JM ultra-low-power Wi Fi module
Add dual-band Wi‑Fi connectivity and embedded processing for vehicle telemetry, diagnostics, and battery-operated peripheral sensor nodes.
Type 2AB – LBUA5QJ2AB-828 UWB and bluetooth LE module
Support UWB ranging and positioning functions in compact, battery-operated mobile and IoT platforms.
Type 2BP – LBUA0VG2BP UWB module
Support one-way and two-way ranging together with two-dimensional and three-dimensional angle-of-arrival designs.
MYMGK/MYSGK/OKL series non-isolated DC/DC converters
Generate efficient point-of-load rails for onboard processors, sensors, cameras, and communications modules.
MYLSM series non-isolated DC/DC converters
Generate efficient point-of-load rails for onboard processors, sensors, cameras, and communications modules.
LQM / LQH / DFE series power inductors
Support compact onboard voltage conversion and low-noise power filtering.
LXMS / LXTB series RFID tags
Enable component, material, asset, and maintenance traceability throughout production and intralogistics operations.
Condition monitoring and smart sensor nodes
Condition-monitoring systems must accurately detect changes in acceleration, inclination, alignment, and temperature before transferring the resulting data to a controller, local gateway, or cloud platform.
Murata combines stable MEMS sensing, low-power Wi‑Fi and Bluetooth connectivity, PoE, isolated power, temperature sensing, and low-noise filtering for embedded and retrofit monitoring nodes used with motors, pumps, conveyors, production equipment, structures, and factory infrastructure.
Advantages
Stable measurement of tilt, alignment, structural movement, and low-frequency acceleration
Low-power wireless connectivity for embedded and retrofit monitoring nodes
PoE and isolated power for wired sensors, gateways, and analog measurement circuits
Product categories
Featured solutions
SCA3400-D01 three-axis accelerometer
Provide low-noise, high-stability acceleration and tilt data for structural-health monitoring, machine alignment, leveling, and low-frequency condition monitoring.
Type 2JM – LBWA0ZZ2JM ultra-low-power Wi Fi module
Connect battery-operated and retrofit monitoring nodes to factory Wi Fi networks while providing embedded processing for local sensor functions.
Type 2NR – LBMA0ZZ2NR bluetooth LE / IEEE 802.15.4 module
Enable low-power sensor networking, mobile commissioning, local data collection, and maintenance access.
MYBSP series PoE+ PD DC/DC converters
Power Ethernet-connected sensor nodes, cameras, gateways, and monitoring equipment through a combined data-and-power connection.
NCM3 series isolated 3 W DC/DC converters
Provide high-isolation power for sensitive sensor, analog, measurement, and communication circuits.
NCP / NCU series NTC thermistors
Add compact temperature monitoring for motors, bearings, drives, power supplies, and equipment enclosures.
NFM series three-terminal low-ESL EMI filters
Suppress broadband power noise and stabilize sensitive sensor and analog measurement rails.
BLM series chip ferrite beads
Reduce high-frequency noise on sensor, processor, communication, and power lines.
