The EPC9051 is a high efficiency, differential mode class-E amplifier demonstration board that can operate up to 15 MHz.
This board may also be used for applications where a low side switch is utilized. Examples include, and are not limited to, push-pull converters, current-mode Class D amplifiers, common source bi-directional switch, and generic high voltage narrow pulse width applications such as LiDAR.
The amplifier board features the 100 V rated EPC2037 eGaN FET. The amplifier is set to operate in differential mode and can be re-configured to operate in single-ended mode. The key feature of this amplifier is that it does not require a gate driver for the eGaN FETs and is driven directly from the logic gates provided. A separate logic supply regulator has also been provided on the board. GaN
| Manufacturer | EPC |
|---|---|
| Category | Power Management |
| Sub-Category | Power Output Stages (H-Bridge, Half Bridge) |
| Eval Board Part Number | 917-1104-ND |
| Eval Board Supplier | EPC |
| Eval Board |
Board not Stocked
|
| Configuration |
Class E amplifier
|
| Voltage Out Range |
0 ~ 40 V
|
| Current Out |
1 A
|
| Interface |
Parallel Logic
|
| Features |
Shoot Through Protection
|
| Switching Frequency (Max) |
15 MHz
|
| Component Count + Extras |
24 + 4
|
| Design Author |
EPC
|
| Main I.C. Base Part |
EPC2037
|
| Date Created By Author | 2015-09 |
| Date Added To Library | 2018-08 |
Settings
Fast Delivery
Payment Types
Marketplace Product
